Cylinder block

Heigth mm (inch)	289.0 (11,38)
Maximum Distortion mm (inch)	0,15 (0,006)
Grinding limit mm (inch)	0,20 (0,008)
Cylinder bore diameter mm (inch) Standard 0,25 (0,020) oversize 0.50 (0.020) oversize	86.000 - 86,019 (3,3858 - 3,3866) 86,250 - 86,269 (3,3957 - 3,3964) 86,500 - 86,519 (3,4055 - 3,4062)
Cylinder bore taper and out of round maximum	0,019 (0,0007)