(1) Complete Front Differential Assembly (used). 14\43 (gear ratio of 307). Gears are Excellent. Weight is 95 lbs. Price is $550.00 + S&H. SOLD
(2) One Front Spindle #1 (used). Some of the Lug Studs are incorrect lengths (Too long). Splines are Good. Weight is 19 lbs. Price is $100.00 + S&H. SOLD
(3) One Front Spindle #2 (used). Some of the Lug Studs are incorrect lenths (Too long). Splines are Good. Weight is 19 lbs. Price is $100.00 + S&H. SOLD
(4) Complete Defrost Fan and Motor (used). Works OK. Weight is 4 lbs. Price is $20.00 NOW $10.00 + S&H. SOLD
(5) Complete Heater Fan and Motor (used). Works OK. Weight is 4 lbs. Price is $20.00 NOW $10.00 + S&H. SOLD
(6) Heater Core and Fan assembly (used). One hose fitting slightly out of round and bent. Weight is 11 lbs. Price is $60.00 NOW $30.00 + S&H. SOLD
(7) Front Brake Drums (2 used). Both drums have never been re-machined. Both drums have slight chips in the edges. One has a .020" groove in it. Weight is 44 lbs each. Price is $250.00 \pair NOW $200.00 \pair or $150.00 for best one, or $100.00 for one with groove in it. + S&H. SOLD
(8) Rear Brake Drums (2 used). Both have been turned previously.Both can be re-machined again. Weight is 32 lbs each. Price is $100.00 \pair or $65.00 each + S&H. SOLD
(9) Front Steering Assembly, driver's side Idler arm (used).Drag link, short link, Tie rod ends. Will sell components separately. Weight is 25 lbs. as pictured. Price is $65.00 as pictured + S&H. SOLD
(10) One incomplete Front Drive Shaft Assembly (used). No C-V Joint (now both sold) and used U-joint. No boots. No nut, no spline washer, no bands. Weight is 20 lbs. Price is $100.00 + S&H. SOLD
(11) Complete Steering box and Pitman arm (used).Will verify inside condition upon request. Weight is 30 lbs. Price is $100.00 + S&H. Pitman arm alone is $25.00 + S&H. SOLD
(12) Complete Passenger side front Bearing Housing (used). With existing bearings and seals (used also).No Brakes. Wheel cylinder is probably no good. Weight is 45 lbs. Price is $100.00 NOW $50.00 + S&H. SOLD
(13) Complete Driver's side front Bearing Housing (used). With existing bearings and seals (used also).No Brakes. Wheel cylinder is probably no good. Weight is 45 lbs. Price is $100.00 NOW $50.00 + S&H. SOLD
(14) Complete Power steering pump and pulley (used). Includes mounting bracket. Cannot determine condition. Weight is 14 lbs. Price is $20.00 NOW $10.00 + S&H. SOLD
(15) Lower ball joint (used). Still useable. Weight is 8 lbs. Price is $15.00 + S&H. SOLD
(16) Short tie rod plus ends (used). Still useable. No Boots on ends. Weight is 6 lbs. Price is $20.00 + S&H. SOLD
(17) Long tie rod plus ends (used). Still useable. No Boots on ends. Weight is 10 lbs. Price is $20.00 + S&H. SOLD
(18) Short shaft assembly for 3rd member (used). Splines and threads are OK. Weight is 15 lbs. Price is $100.00 NOW $50.00 + S&H. SOLD
(19) Kent model hydraulic jack (used). Works OK. Includes adjustable arm. Does not include handle. Weight is 34 lbs. Price is $50.00 + S&H.
SOLD
(20) Water pump for 455 engine (used).Cannot determine condition. Weight is 12 lbs. Price is $5.00 + S&H. SOLD
(21) Complete Steering Wheel and Column Assembly (Used). Tilt column. Wheel itself is cracked in 2 places. Horn button is missing. Weight is 25 lbs. Price is $50.00 NOW $25.00 + S&H.
SOLD
(22) Driver's side rear backing plate (used). Surface rust. Slightly gouged on top. Weight is 9 lbs. Price is $10.00 NOW $5.00 + S&H. SOLD
(23) Upper control arm #1 (used). Right side bushing OK. Left side bushing poor. Weight is 29 lbs. Price is $60.00 + S&H. SOLD
(24) Upper control arm #2 (used). Right side bushing fair. Left side bushing fair. Upper ball joint did damage to
under side of end of control arm. Weight is 29 lbs. Price is $30.00 + S&H. SOLD
(25) Lower control arm #1 (used). Both bushings poor. Weight is 30 lbs. Price is $40.00 + S&H. SOLD
(26) Lower control arm #2 (used). Both bushings poor. Weight is 30 lbs. Price is $40.00 + S&H. SOLD
(27) Driver's side rear trailing arm (used). Bushings OK. Arm itself is not twisted. Spindle needs replacement or repair. Weight is 60 lbs. Price is $50.00 NOW $25.00 + S&H.
SOLD
(28) Rear hub #1and #2 (used). Both Need complete rebuild. Damaged badly. Weight is 23 lbs each. Price is $5.00 each + S&H.
Both SOLD
(29) Misc. brake shoes (used). Good to OK condition 5 sets total. Weight is 6 lbs. per set. Price is $5.00 (one pair of shoes) + S&H. SOLD
(30) Front stabilizer bar (used). Bushings tired but straight. Weight is 18 lbs. Price is $50.00 + S&H. (Quantity of 2 available)
SEE PICTURE
(31) Front Headlight buckets (used). Right side bucket is missing adjusting bracket. Weight is 8 lbs. for pair Price is $30.00 + S&H.
SOLD
(32) Upper ball Joints (rebuilt). Like new. (these were rebuilds with new parts used) Weight is 2 lbs. each. Price is $120.00 each or $200.00 for pair + S&H. (Quantity of 2 available) SOLD
(33) Lower ball joint (NEW). Weight is 3 lbs. Price is $100.00 + S&H.
SEE PICTURE
(34) Front drive shaft nut and spline washer (used). Threads OK. Splines OK. Weight is 3 lbs. Price is $20.00 per set + S&H. (Quantity of 2 sets available)
SEE PICTURE
(35) '71 Kent model radiator (used). Good condition. Modine #1A8450L080. Hose ends round and not distorted. Shows 2 signs of minor leaks at core in corners. Weight is 60 lbs. Price is $300.00 NOW $150.00 + S&H. SOLD
(36) '71 AC condenser (used). Fair condition. Fittings slightly rough, but not stripped. Weight is 7 lbs. Price is $25.00 NOW $15.00 + S&H.
SOLD
(37) '71 AC evaporator (used). Fittings OK. Both end tanks slightly dented. Weight is 5 lbs. Price is $25.00 NOW $15.00+ S&H.
SOLD
(38) Rear springs (2) (used). Good condition. No cracks. Normal surface rust only. Weight is 24 lbs each. Price is $75.00 each or $125.00 for pair + S&H.
SOLD
(39) Speedometer Gauge (used). Works OK. Cannot test accuracy. Glass is good and clear. Bezel is clean.
Needle is still orange. Weight is 3 lbs. Price is $40.00 + S&H.
SEE PICTURE
(40) Tachometer Gauge (used). Works OK. Cannot test accuracy. Glass is good but ever so slightly fogged on inside. Bezel is clean. Needle is still orange. Weight is 3 lbs. Price is $40.00 + S&H.
SEE PICTURE
(41) Oil pressure Gauge (used).Will test accuracy upon request. Glass is good and clear. Bezel needs slight polishing. Needle is faded to white. Weight is 2 lbs. Price is $20.00 + S&H.
SEE PICTURE
(42) Water temerature Gauge (used). Will test accuracy upon request. Glass is good and clear. Bezel is clean.
Needle is faded to white. Weight is 2 lbs. Price is $20.00 + S&H.
SEE PICTURE
(43) Vacuum Gauge (used). Works OK. Appears to be accurate. Glass is good and clear. Bezel needs slight polish. Needle is orange but slightly faded to white. Weight is 2 lbs. Price is $20.00 + S&H.
SEE PICTURE
(44) Fuel Gauge (used). Needle sticks. Glass is good and clear. Bezel is clean.
Needle is orange. Weight is 2 lbs. Price is $10.00 + S&H.
SEE PICTURE
(45) Alternator (amps) Gauge (used). Appears to work OK. Glass is good and clear. Bezel needs slight polish.
Needle is orange. Weight is 2 lbs. Price is $20.00 + S&H.
SEE PICTURE
(46) '71 dash indicator lights. (used). All work OK.Includes the following: Door ajar, brake fail, park brake, hi-beam, heat fan, lighter, def fan, fresh air, heat, throttle, left arrow, right arrow. All chrome is good. All colored centers are good.. Weight is 3 ounces each. Price is $2.00 each + S&H. SOLD
(47) '71 dash switches (used). All appear to work OK. Most knobs are OK, one is missing. Includes the following: Headlight switch ($5.00), wiper switch ($5.00), heat fan switch ($3.00), defroster fan switch ($3.00) Weight is 1 lbs. or less each. Prices are + S&H. SOLD
(48) Ignition switch (used). No keys. Cannot test operation. Weight is 2 lbs. Price is $5.00 + S&H. SOLD
Note on Parts: I have a very limited quantity on all parts. I have tried to price all parts fairly. Most parts will ship
via UPS. Heavier parts will need to ship via truck line. I will add a handling charge on parts which are an odd size or require special packaging. Otherwise, only the actual shipping charges will be added to the price.
Second note: I have tried to determine the condition of all parts unless listed otherwise. I cannot be held responsible for defects I cannot see. I will accept any requests to verify any part further. Just email me.
Third note: I will not ship any parts until payment is received. I cannot ship COD. Sorry.
If I don't have the part listed you are looking for, just email me. If I have it, I will let you know by return email. If I don't have it, I may know where you can find it.
any questions,EMAIL ME,Thank You,... Dana Keech
